Table of Contents
Advertisement
PARTS
1
ASSEMBLY
1. Remove the Plug Adaptor [5] from the Water
Tank [4].
2. Replace Water Tank [4] into Dehumidifier.
3. Plug Adaptor [5] into Socket [3] and into
Mains Plug Socket.
4. Power on by pressing the On/Off Button [1].
5. Light will illuminate the top section, and the
Dehumidifier is now operating.
To turn the Light Indicator On or Off, hold the
On/Off Button [1] for 3 seconds.
EMPTYING THE WATER TANK
Ensure Dehumidifier
is switched off at
mains, and Adaptor
is removed for safety.
Do not tilt the
dehumidifier when
the tank is full.
RHDH1061
2
3
5
FULL WARNING
The water tank has a
maximum capacity of
600ml, and an operating
capacity of 300ml/day.
When the Water Tank is
full, the Light
illumination will turn
orange and flash, and the
unit will stop operating.
1. On/Off Button
2. Power Light
3. Power Socket
4. Water Tank
5. Plug Adaptor
4
Revision 2.1
Advertisement
Table of Contents
