Page 1
Assembly Instructions & User’s Manual AGame Trampoline Starter Kit 166049 Assembly Size: 38 x 13 inch To be used under the direct supervision of an adult. Never leave children unattended. To avoid accidents and to restrict access to the trampoline, never leave the ladder placed on the trampoline when not in use.
Table of Contents Warnings………………………………………………………………………….…3 Tools and Parts……………………………………………………………………...4 Assembly Instructions……………………………………………………………..6 Care and Maintenance………………………………………………………...……13 Warranty Information…………………………………………………....14 Note: Before beginning assembly of product, make sure all parts are present. Compare parts with package content list and hardware contents. If any part is missing or damaged do not attempt to assemble the unit.
Warnings Please read the instructions carefully. Make sure all parts are present before assembling the ladder. ● Do not attempt to assemble the ladder if any parts are missing or damaged. ● Please dispose of all polyethylene packing material properly and keep it away from children. ●...
Parts List For Ladder Key Number Description Diagram Q’ty Frame Leg Tube Plastic Ladder Step Lower Frame Leg Tube Bolt ( M6x40mm ) Bolt ( M6x35mm ) Cap Nut (M6) Spring Washer Washer Allen Wrench Wrench Safety Instruction Placard...
Page 5
Parts List For Anchor Kit Key Number Description Diagram Q’ty Anchor Straps...
Assembly Instructions For Ladder STEP 1 Insert two Frame Leg Tubes (#1) through two Plastic Ladder Steps (#2) until the holes are lined up. Noted: Make sure the checkered pattern on the steps are facing up.
Page 7
Assembly Instructions For Ladder STEP 2 Insert Bolts (#4) through the ladder steps and frame leg tubes. Securely fasten the bolts using Allen Wrench (# A) as shown. ...
Page 8
Assembly Instructions For Ladder STEP 3 Connect two Lower Frame Leg tubes (#3) to the Frame leg tubes (#1) and align the bolt holes. Secure with Bolt (#5), Washer (# 8), Spring Washer (#7), Cap Nut (#6) using the Allen wrench (# A) and Wrench (#B) to tighten as shown.
Page 9
Assembly Instructions For Ladder STEP 4 Position the ladder by the doorway where you can enter / exit the trampoline: A. Lift the padding and hook the ladder onto the trampoline frame. B. Ensure the ladder does not interfere with the ties, springs or mat. C.
Page 10
Assembly Instructions For Ladder STEP 5 Use the plastic tie provided to attach Ladder Safety Instruction Placard (# H) to the ladder as shown below. Make sure it does not obstruct the steps.
Page 11
Assembly Instructions For Anchor Kit Step 1 Screw in the Anchor ( #1 ) to the soil as shown below.
Page 12
Assembly Instructions For Anchor Kit Step 2 Attach the strap ( #2 ) over the main frame and leg of the trampoline, through the Anchor kit (#1) as shown below. Secure the strap with buckle by pulling the 2 end points to ensure it is tight after assembly as shown below.
Care and Maintenance Inspect the ladder before each use and replace any worn, defective or missing parts. Regularly check that all bolts are tightened. Do not leave the ladder outdoors when not in use. The ladder should be stored in a dry covered area when not in use. ...
SPORTSPOWER LTD. Warrants its products to be free from defects in material and workmanship under normal use and service conditions for one (1) year after the date of purchase. All warranty coverage extends only to the original retail purchaser from the date of purchase. SPORTSPOWER’S obligation under this Warranty is limited to replacing at SPORTSPOWER’S option.
Need help?
Do you have a question about the 166049 and is the answer not in the manual?
Questions and answers