Vaultek LifePod 2.0 Instruction Manual page 6

Quick Start Guide Biometric Scanner Programming
Your safe can store 20 unique fingerprint IDs. The 1st and 2nd fingerprints will be recognized as
administrative fingerprints and will be used to authorize additional users (3-20).
Fingerprint Tip! Place the core of the fingerprint flat (Fig H) over the center of
the scanner (this allows the scanner to read where most of the fingerprint detail
is located). Additional fingerprint tips on page 11.
First open the unit and tap the lock pad to
wake the unit up (Fig E on page 06). When the
keypad lights up, your LifePod is awake and
®
ready for programming. Programming each
fingerprint takes 4 registration scans.
Registration Scan 1: While LifePod ® is awake,
quickly tap the program button (Fig F page 06)
to get the 1 key blinking. Place your finger on
the scanner and remove it when the status
LED turns GREEN and you hear a confirmation
beep.
Registration Scan 2: With the 2 key now
blinking, place same finger on the scanner at
a slightly different angle and remove it when
the status LED turns GREEN and you hear a
confirmation beep.
07 Vaultek
®
Step 3
H
Registration Scan 3: With the 3 key now
blinking, place same finger on the scanner at
a slightly different angle and remove it when
the status LED turns GREEN and you hear a
confirmation beep.
Registration Scan 4: With the 4 key now
blinking, place same finger on the scanner at
a slightly different angle and remove it when
the status LED turns GREEN and you hear a
confirmation beep. This completes enrollment
for the first admin print.
Tip! Simply scan an authorized fingerprint to
unlock LifePod . No need to wake up LifePod
®
Tip! Repeat steps 1-5 to enroll the 2nd admin
print. To program prints (3-20) refer to page 13.
Quick Start Guide Product Registration
Vaultek ® strongly encourages you to register your LifePod
provides many benefits including two year warranty, technical support, and ordering replacement
keys should you misplace them. Your Vaultek
of the battery door and a 4-digit ID number engraved on the keys. You will need these numbers to
register your new unit.
Locate your product number. It is printed on the first page of this user manual and on the back of
the battery door (Fig I).
Find your 4-digit ID number engraved on the keys (Fig J).
Please visit the Vaultek
®
from the available options.
Enter the required information in the form and click submit.
.
®
I
as soon as you receive it. Registration
®
® LifePod ® has a unique product number on the inside
website at vaulteksafe.com and click Support then click Registration
J
Step 4
08 Vaultek
®