Vaultek LifePod 2.0 Instruction Manual page 4

Basic Operation: Unlocking
With a 9V battery installed, you can now unlock your LifePod
numeric keypad with built-in proximity sensor. Touch lock pad on
the keypad to wake the safe before entering your master code.
IMPORTANT! Before entering your master code or when
programming you need to wake the safe by placing your finger on
the lock pad (Fig A) so all the keys light up RED.
IMPORTANT! Do not undo the compression latches until the unit
has been unlocked with the correct master code first. Undoing the compression latches first may
cause binding on the lock mechanism and will not unlock.
Master Code: Touch activated 4-digit backlit LED capacitive keypad.
First tap the lock pad to wake the unit up. When the keypad lights up, your LifePod
ready to accept the code. Enter your master code. When the code is correct, the status LED will turn
GREEN and the lock will disengage. Default master code is 1-2-3-4.
Backup Keys: Included backup manual keys are provided to unlock the unit if the battery dies.
To unlock LifePod , simply open the protective cover at the front of LifePod
®
insert one of the backup keys, and turn the key clockwise 90 degrees. If the Anti-Picking feature is
enabled, the backup keys can not open LifePod
Continue on next page.
03 Vaultek
®
safe. Unique to LifePod is a capacitive
® ®
A
is awake and
®
(Fig 10 on page 01),
®
. IMPORTANT The manual key can not lock LifePod
®
Basic Operation: Unlocking
Biometric Scanner (Biometric Model Only): Capable of storing up to 20 unique fingerprints.
Simply scan an authorized fingerprint to unlock LifePod
the scan is authorized, the status LED will turn GREEN and the lock will disengage. Your safe can
store 20 unique fingerprint IDs. The 1st and 2nd fingerprints will be recognized as administrative
fingerprints and will be used to authorize additional users (3-20).
Basic Operation: How your Vaultek
Anti-Impact Latch: Built to withstand forceful impacts.
High Impact Polymer: Engineered to be extremely strong and impact resistant.
Anti-Pry Design: The interior channels and gasket form a seal around the inner chamber making
it difficult for tools and other small objects to penetrate.
Security Tether: An included security cable can be used to secure LifePod
Security Sleep Mode: Activates when (6) consecutive incorrect keypad or fingerprint entries
(biometric model) are entered. LifePod
pressed during this time, the status LED will flash RED and the alarm beeps. A backup key can be
used to open the unit.
.
®
® . No need to wake up LifePod
LifePod keeps people out
® ®
® to a stationary object.
® will not accept any entries for four minutes. If a key is
® . When
04 Vaultek
®