Table of Contents
Advertisement
Quick Links
OPTIMUM RADIANT HEATER
EH600 SERIES
Metal radiant heater with non glowing element
Adjustable wall and ceiling bracket
Black anodised aluminium
1.5m long power cord
Designed for indoor and outdoor use
Ideal for use in alfresco areas, verandahs and garages
EH633B & EH633RB requires 15A power point to be
installed by qualified electrician
03455 05/16
Gasmate
Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber Living www.gasmate.co.nz
Important: Retain these instructions for future use
is a registered trademark of
®
03841 05/21
Advertisement
Table of Contents
Related Manuals for Gasmate EH600 Series
Summary of Contents for Gasmate EH600 Series
- Page 1 EH633B & EH633RB requires 15A power point to be installed by qualified electrician Gasmate is a registered trademark of ® Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Living www.gasmate.co.nz Important: Retain these instructions for future use 03841 05/21 03455 05/16...
-
Page 2: For Your Safety
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS Safety SAFE OPERATION Before attempting to operate this heater, the following Beware of Children and Pets basic safety precautions should be taken to reduce Children should not be allowed to touch or operate the risk of fire, electric shock and personal injury. It heaters or touch extension cords, if used. -
Page 3: Specific Safety Instructions
SPECIFIC SAFETY INSTRUCTIONS WARNINGS Do not use the heater in areas where there is a risk of • DO NOT attempt to modify the heater, power cord, explosion or fire from flammable gases. Ensure that the power plug or the supplied accessories in any way. heating area is kept clear of combustible materials. -
Page 4: Electrical Data
ELECTRICAL DATA IMPORTANT This product is fitted with a sealed electrical connection plug that is compatible with the heater, the mains supply for Australia and meets the requirements of international standards. This heater must be connected to a supply voltage that is equal to that stated on the rating label. -
Page 5: Mounting Heater
MOUNTING HEATER GENERAL MOUNTING SUGGESTIONS If unsure please discuss with your local hardware store. • Ensure the fixing screws are at least suitable for 10Kg each. • If fitting to a stud wall or ceiling ensure all fixing screws are into timber. Plasterboard IS NOT suitable by itself. - Page 6 CEILING MOUNT WITH CHAIN Only use this mounting option if your ceiling is too high. 1. Attach the bracket (C) as noted below. 2. Cut chain (D), not supplied, to desired length. 3. Using nut and bolt attach chain to bracket (C) and bracket (B). 4.
-
Page 7: Heater Positioning
HEATER POSITIONING eave/ceiling 1. Position heater at least 200mm from the eave lining or ceiling or wall at 90˚ to heater. 2. Position heater at least 1.8m above the floor. 3. Never position in front, above or below a power point. 4. - Page 8 Monday to Friday 8.00am - 5.00pm AEST Keep your purchase receipt, this will be required to make any claims under the 12 month warranty. Gasmate ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Living www.gasmate.co.nz...