Epson Stylus Photo 750 User Manual page 48

If your printout is faint or has gaps
in the image . . .
Make sure the print head nozzles are
not clogged. To clean the print head,
see page 27.
Make sure your paper isn't damaged,
old, dirty, or loaded face down (the
printable surface should be loaded
face up). If it is, reload a new stack of
paper with the printable side up.
If your printout is grainy . . .
Try using a higher quality paper.
Make sure you set the Quality/Speed
slider to the
printer software; see page 15
(Windows) or page 17 (Macintosh)
for instructions.
Run the Print Head Alignment
Utility. See page 35 for instructions.
You may need to increase the image
resolution or print it in a smaller size.
See your application software
documentation for instructions.
44
setting in your
Quality
If your printout contains incorrect or
missing colors . . .
Make sure the Ink setting is set to
for color images.
Color
Make sure the print head nozzles are
not clogged. To clean the print head,
see page 27.
Make sure the ink cartridges aren't
low on ink or too old. If either ink
out light is flashing, replace the ink
cartridge; see page 30. If your ink
cartridge is more than six months
old, you may need to replace it; see
page 33.
Try using Automatic mode. See
page 15 (Windows) or page 17
(Macintosh) for instructions.
Your printed colors can never
exactly match your on-screen colors.
However, you can use a color
matching scheme to get as close as
possible. For information on your
printer software's color matching
options, see page 23.