Installing Macintosh Software - Epson Stylus Photo 750 User Manual

5. Click , select
Start
Then click .
OK
6. Follow the instructions on the screen to install the software. Your printer software
icons appear in the EPSON folder and your printer is set as the Windows default
printer.
7. After you install the printer software, repeat steps 4 through 6 to install Status
Monitor 2 from its diskettes.
8. Restart your system.
9. Now you can start to print. See "Printing with Windows" on page 13 for
instructions.

Installing Macintosh Software

1. Make sure your printer and Macintosh are turned off.
2. Turn on the Macintosh and wait until you see the icons on your desktop, then
turn on your printer.
3. Insert the EPSON printer software diskette 1.
4. If necessary, double-click the
double-click the
5. Click .
Continue
6. Click and follow the on-screen instructions to install your printer driver.
Install
Then click
Restart
7. After you finish installing software, open the Chooser. If you're connected to the
Macintosh printer port or to a PowerBook with one port, turn off AppleTalk.
8. Click the
SP 750
background printing, if you want to use it. Then close the Chooser.
9. Now you can start to print. See "Printing with a Macintosh" on page 16 for
instructions.
, and type
Run A :\Setup
icon to open the diskette window. Then
Disk 1
icon.
Installer
.
icon, then click the icon for the port you're using. Turn on
(where is your diskette drive letter).
A
®
51