PSC RF MULTI SR 4 PACK Operation Manual page 4

connectors on the left side panel of the unit. These offer two additional RF outputs that can be
used to feed another PSC RF Multi SR Four Pack or PSC RF Multi SMA or an outboard receiver or
other similar device.
The PSC RF Multi SR Four Pack is also equipped with a built in Battery Distribution System. There
are two battery power inputs on the left side panel of the unit. These two external battery inputs
can be used with various rechargeable battery types and sizes. In our industry these batteries
would typically be NP-1 or the newer "Smart" batteries. You can also use Sealed lead acid (SLA)
batteries, V-lock batteries and many other types. By equipping this new product with two battery
inputs, you can use two batteries at the same time for use with heavy equipment current loads
or for extended run times. You can also use one battery by itself or one battery with our optional
AC power supply.
FRONT PANEL SHOWING: (left to right)
Antenna "A" RF Input BNC
Main Power Switch
Remote Antenna Power Switch
st
1 Slot Position
nd
2 Slot Position
Antenna "B" RF Input BNC
Battery Level LED Meter