Installing The Ink Cartridges - Epson Stylus Photo 1290 Setup Manual

1. Choose Chooser from the Apple
menu. Then, select the icon for your
printer and the port that your
printer is connected to.
2. Select the appropriate
Background Printing radio button
to turn background printing on or
off.
When background printing is on,
you can use your Macintosh while it is preparing a document for
printing. In order to use the EPSON Monitor3 utility to manage print
jobs, background printing must be turned on.
3. Close the Chooser.
Installing EPSON PhotoQuicker
1. After setup is complete, the installer dialog box appears again. Double-
click the EPSON PhotoQuicker, then double-click the Installer icon
inside it.
2. The installer dialog box appears. Click Install.
3. When a message appears informing you that installation is complete,
click Quit.

Installing the Ink Cartridges

This printer uses ink cartridges equipped with IC chips. The IC chip
accurately monitors the amount of ink used by each cartridge, so even if a
cartridge is removed and inserted again, all of its ink can be used. However,
some ink from both color and black ink cartridges is consumed each time a
cartridge is inserted because the printer automatically checks reliability.
Be sure to use the ink cartridges packed with your printer the first time that
you install ink cartridges.
Refer to the appropriate section.