Epson Stylus Photo 1290 Setup Manual page 8

?
Caution:
Turn off all virus protection programs before you install the printer
software.
Installing the printer software
Follow these steps to install your printer software.
1. Turn on your Macintosh and insert the software CD in the CD-ROM
drive. The EPSON printer software CD-ROM opens automatically.
2. If the Install Printer Driver/Utility folder appears in the EPSON folder,
open it and then double-click the Installer icon.
Note:
It is possible to install the Reference Guide on your hard drive from the
printer software CD-ROM. To install the guide, click Install Reference
Guide and follow the on-screen instructions. When the installation is
complete, a View Reference Guide icon appears in the EPSON folder.
Double-click the icon to open the guide.
It is possible to access Technical Support from the printer software
CD-ROM. Insert the CD in the CD-ROM drive and open the Install
Printer Driver/Utility folder in the EPSON folder. Then double-click the
Technical Support Web Site icon.
3. At the initial screen, click
Continue. The Installer dialog box
appears.
4. To install the printer software that
is included on your printer software
CD-ROM, make sure that the Install
Location box displays the correct
drive, then click Install.
5. When a message appears informing you that the installation is
complete, click Restart to restart your computer.
Selecting your printer in the Chooser
After you have installed the printer software on your Macintosh, you need
to open the Chooser and select your printer. You must select a printer the
first time you use it or whenever you want to switch to another printer. Your
Macintosh will always print using the last printer selected. Follow the steps
below to select your printer in the Chooser.