Epson Stylus Photo 1290 Setup Manual page 16

2. Insert the printer software CD in the CD-ROM drive.
3. Open the Install Printer Driver/Utility folder in the EPSON folder and
then double-click the README file.
4. Click Page Setup on the File menu. The following dialog box appears.
5. Select the paper size that is loaded in the printer from the Paper Size list.
6. Select Portrait as the Orientation setting.
7. After making your settings, click OK to close the Page Setup dialog box.
Note:
You cannot print from the Page Setup dialog box. You can only print from the
Print dialog box.
8. Click Print on the File menu. The Print dialog box opens.
9. Select Plain Paper from the Media Type list.
10. Select Color as the Ink option.
11. Select Automatic as the Mode setting. This causes the printer software
to optimize other settings according to the Media Type and Ink settings
that you make.
12. Click Print to start printing.
While printing is in progress, the EPSON Progress Meter is displayed,
showing the printing progress and the status of your printer.
Note:
If the sample file does not print correctly, see "Problem Solver" in the online
Reference Guide for solutions.