Electrolux EXS09V38HW User Manual page 16

16 www.electrolux.com
5. Quiet function (optional)
Press the Fan button for more than 2
seconds to enable the Quiet function.
When in Quiet function, the fan will run in
slowest speed. This function is aim to give
you a comfortable low noise environment.
6. 8 C Heating function (optional)
0
When the air conditioner operates under
heat mode with the set temperature
of 17 C, press "-" button twice in
0
one second will activate 8
function. The unit will operate at a setting
temperature 8
display shows "FP".
7. Follow me function
When you press the Follow me button,
the Follow me function will be activated,
the remote controller works as a remote
thermostat, providing an accurate
temperature control and maximum
comfort. The remote controller sends the
temperature information at its location to
the indoor unit. The air conditioner will quit
Follow me operation if no temperature
information is received from the remote
controller.
8. Self clean function
Press the Self clean button to activate
the Self clean feature, your unit will clean
itself automatically. After cleaning, unit will
turn off automatically. Airborne bacteria
can grow in the moisture that condenses
around heat exchanger in the unit. With
regular use, most of this moisture is
evaporated from the unit. You can use self
clean feature as often as you like.
You can only activate this function
in COOL (AUTO COOL) or DRY
mode.
C Heating
0
C and the indoor unit
0
9. Lock function
Press Turbo and Self clean buttons at the
same time for 1 second, you can lock and
unlock the remote controller.
10. Short cut function (optional)
Press the Short cut button to enable or
disable the Short cut function.
On the first time connecting to the power,
if press the Short cut button, the unit will
operate on AUTO mode, 26 °C, and fan
speed is Auto.
Press this button when remote controller
is on, the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature (if activated).
If pressing more than 2 seconds, the
system will automatically restore the
current operation settings including
operating mode, setting temperature, fan
speed level and sleep feature (if activated).