Using Your Sabre - Russell Hobbs RHHV3001 Manual

USING YOUR SABRE

Once assembled and charged:
1. Unplug the charger and place the floor head on the floor.
2. Press the power switch on the top of the unit to start the power.
3. Move the cleaner floor head in a forwards and backwards motion
over the areas you would like to clean.
Note: Large items can get trapped in the brush/floor head which
could cause the unit to overheat. Make sure you pick up larger items
that could get trapped before vacuuming.
4. To enable Eco mode, press the button on the left side of the unit.
5. To turn off the power, press the power switch on the top of the
unit.
11