Setting Up The Emulation Software; Installing The Emulator Software On Pc; Check Emulation System With The Io-Port Sample Project - Fujitsu F2MC-16LX FAMILY Installation Manual

MB2147 – Installation Guide
Chapter 3 Setting up the Emulation Software

3 Setting up the Emulation Software

SOFTWARE INSTALLATION

3.1 Installing the emulator software on PC

To work with the 16-Bit emulation system, you have to install the Softune Workbench
Software environment from the CD-ROM. After executing setup.exe you will find a menu with
install options. Select all items and start the installation. The default path is C:\Softtune. After
the installation you will find the Softune workbench ready to use for the new 0,35O-16-Bit
microcontroller series.
The CD-ROM includes also some demonstration projects for the MB90390 series. Install
them also in a directory of your PC.

3.2 Check Emulation System with the IO-Port Sample Project

Open the Softune Workbench. Then choose the Menu File/Open. The following window will
pop up:
Confirm Workspace/Project file with the OK button.
Now choose the IO-Port-Workspace-File IOPort.wsp in the Open File Dialog Window.
Then the Softune Workbench window will look like this:
© Fujitsu Microelectronics Europe GmbH - 17 - MCU-AN-390070-E-V29