Important Safeguards And Warnings; General Information; Use Of The Manual; Safety Guidelines - adept technology HM140/1 Installation Manual

Foil heating mat system
Table of Contents

Advertisement

Important Safeguards and Warnings

WARNING: Shock and fire hazard
If the Foil Heating Mat System is damaged or not installed properly, fire or shock could occur
resulting in serious personal injuries or damage to property. You must carefully follow the
warnings and instructions contained in this manual.
· A Thermostat must be used.
· It is important that this equipment is installed only by qualified electricians who are familiar with
the proper sizing, installation, construction and operation of floor warming system and the hazards
involved. The installation must comply with all national and local electrical codes. If you are
unfamiliar with these requirements, contact an electrician.
· The Foil Heating Mat System is designed for under floor heating purposes only. Be sure that the
floor is not penetrated by nails, screws, or similar devices that can cause damage on first
installation or during subsequent floor repairs in the future.
· If the Foil Heating Mat System is damaged, it must be replaced. Do not attempt to splice or
repair any part of the system

1 General Information

1.1 Use of the Manual

Installing Foil Heating Mat is very easy to do. Foil Heating Mat Systems combine the highest
comfort levels with maximum energy efficiency. It's a proven technology that's safe, reliable and
energy efficient. This manual describes the Foil Heating Mat floor heating system — how to
design the room, select the product, and install the system. It is important to thoroughly review
this manual and the following document prior to installation:
Thermostat Installation and Operation Manual
For additional information regarding any aspect of the Foil Heating Mat System, contact:
Adept
Tel: 01394 593110
mail@adeptfloorheating.co.uk
www.adeptfloorheating.co.uk

1.2 Safety Guidelines

The safety and reliability of any floor heating system depends on proper design, installation, and
testing. Incorrect installation or mishandling of the product can cause damage to the heating cable,
system components and property, and can create a risk of fire or shock. The guidelines and
instructions contained in this guide are important. Follow them carefully to minimize these risks
and to ensure that the Foil Heating Mat system performs reliably.
Pay special attention to the following:
·Instructions marked
Important
·Safety warnings identified as
WARNING
1

Advertisement

Table of Contents
loading

Table of Contents