Set Up The Printer; Unpack The Printer - Epson Stylus Color 850 Start Here Manual

1
1

Set up the printer

Set up the printer

1 Unpack the printer

Remove any packing material from the printer.
See the Notice Sheet in the box for details.
Make sure you've got all these items:
the printer
the paper support
one color and one black ink cartridge
package
the CD-ROM package called "Your printer
software"
®
the EPSON Media Pack containing sample
ink jet paper
a facsimile of a print sample you can create
your User's Guide package
a cable to connect the printer (not
supplied)
Note:
To connect your printer to a PC, you need a
shielded, twisted-pair parallel cable (6 to 10
feet long). To connect it to a Macintosh,
need an Apple ® System Peripheral-8 cable
(Belkin brand recommended). If you're
connecting to a network, see Appendix A
and B in your User's Guide for instructions.
2 Put on the paper
Insert the paper support in the top slot on the
back of the printer until it is securely seated.
Caution:
Place the printer near the computer, but avoid
areas
Follow all the Safety Instructions in the
Introduction of your User's Guide .
®
you'll
support
with high temperature or humidity
in direct sunlight or dusty conditions
near sources of heat or electromagnetic
interference.
Open to continue