Advertisement
Available languages
Available languages
Induction Cooker(Left side and Right side is the same)
6. Power ( function 1)
a) When switch on or in other cooking mode, touch any key on slider
The heat indicator lights and LED displays "1200", the cooker starts to keep
heating on 1200W.
b) slide the
c) The maximum display power is 2000. and minimum power is 200.200-
500-800-1000-1200-1400-1600-1800-2000W,total 9 level
d)When switch on but no any operations, the cooker will automatically
power off in 1min. When the cooker is working, if no any operations, it will
automatically power off in 2hours.
7. Warm ( function 2)
a) When switch on, or in other cooking mode, touch "warm" key
to select Warm function, the temperature indicator lights and LED displays "
70",press again LED displays"80",again LED displays"90".
8. Pause ( function 2)
a) When switch on, or in other cooking mode, touch "Pause" key
unit will paused and stop working,touch "Pause" key
start working again.
Boost Function
When the cooker is working, touch the boost function key
increase to max 2400.And the cooker will keep working in 2400W level for
5mins.
FAULT ANALYSIS for induction cooker
E0:Check whether there in no pot or the pot is not acceptable
E1:Check whether the Voltage is too low, lower than 88V
E2:Check whether the Voltage is too high, higher than 280V.
E3:Check whether heat sensor is overheat or short circuit.
E4:Check whether heat sensor is open circuit or not work.
E5:Check whether IGBT is over heat or short circuit
E6:Check whether IGBT is open circuit or not work.
Product are imported and distributer by VINA STAR JSC.
Hotline: 1900 588 851
to select power function.
.to increase or decrease the power.
,the
again, the unit will
,
the power will
9
Advertisement
