Advertisement
Available languages
Available languages
E8:Check whether there is water overflowed on the glass top of the
control board.
Built-in Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall
be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material
to avoid larger deformation caused by the heat radiation from the hotplate.
As shown below:
Below dimensions apply
L(mm)
W(mm)
730
430
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may
change specifications and designs without prior notice
Under any circumstances, make sure the cooker is well ventilated
and the air inlet and outlet are not
Product are imported and distributer by VINA STAR JSC.
Hotline: 1900 588 851
H(mm)
D(mm)
67
63
A(mm)
B(mm)
670
390
X(mm)
50 mini
10
Advertisement
