Fein WSG 8-115 Instruction Manual page 19

3 41 01 050 06 0.book Seite 19 Dienstag, 12. Juni 2007 10:57 10
Handle accessories carefully and store them
according to the manufacturer's instructions.
The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool.
Wheels must be used only for recommended appli-
cations. For example: do not grind with cutting
wheels.
Do not use accessories which are not specifically
designed and recommended by the power tool
manufacturer.
Do not use accessories that require liquid cool-
ants.
The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool.
The arbor size of wheels, flanges, backing pads or
any other accessory must properly fit the spindle
of the power tool.
Do not use worn down wheels from larger power
tools.
Do not use a damaged accessory. Before each use
inspect the accessories such as abrasive wheels
for chips and cracks, backing pads for cracks,
tears or excess wear and wire brush for loose or
broken wires. If the power tool or the accessory is
dropped, inspect for damage or install an undam-
aged accessory. After inspecting and installing an
accessory, position yourself and bystanders away
from the plane of the rotating accessory and run
the power tool at maximum no-load speed for one
minute.
Make absolutely sure that the accessory is
mounted in accordance with the manufacturer's
instructions. The mounted accessory must be able
to rotate freely.
Always use an undamaged wheel flange of the
correct size and shape for your selected wheel.
Always work using the auxiliary handle.
Use only wheel types that are recommended for
your power tool and the specific guard designed
for the selected wheel.
Always use the guard designed for the type of
wheel you are using. The guard must be securely
attached to the angle grinder and positioned for
maximum safety. It must be mounted in the safest
possible position, such that the least amount of
wheel is exposed towards the operator.
Clean the ventilation openings on the power tool at
regular intervals using non-metal tools.
Do not operate the power tool near flammable
materials.
Keep bystanders away from the working area.
Anyone entering the working area must wear per-
sonal protective clothing/equipment.
Conduct the mains lead away from the rotating
wheel.
EN