Referring Documents - Kentec Electronics DNX-R-2F-K User Manual

Mounting
This unit should be mounted on 35 mm DIN-rail, which is horizontally mounted inside
an apparatus cabinet, or similar.
The mounting is of the "snap on" type.

Referring documents

Information relating to specific application of this device can be found in the following
application notes.
Type Title
Application Note Network Redundancy with DNA R-1 & DNA R-2
Application Note Multi-fault tolerant networks using DNA R-1 & DNA R-2
Application Note Network Bridge Redundancy with DNA R-1 & DNA R-2
Application Note Communication Bridges with DNA R-1 & DNA R-2
34
Table 12
Document Number
502-DNARIE01-A-01
502-DNARBIE0-A-01
502-DNARBIE1-A-01
502-DNARBIE2-A-01
Man-1492
DNX-R-2F/FC-K