Table of Contents
Advertisement
USB connection
The USB micro (B) connector is located on the DNX R-2F/FC as indicated in Figure 8.
Figure 8: USB micro (B) connector
The USB is supplied with a driver that will need to be installed prior to using the USB
connection. When using the USB connection, it is installed as a virtual serial
communication port, with the specific com port address confirmed using the Windows
Control Panel. Refer to the User Manual for the IVIEW Software application tool for
installation details.
Bluetooth interface
The Bluetooth interface is available as an "add-on" interface supplied as a separate
product. (Ref: WIM100B)
WIM100B
Wifi interface
The Wifi interface is available as an "add-on" interface supplied as a separate product.
(Ref: WIM100W)
WIM100W
19
Man-1492
DNX-R-2F/FC-K
Advertisement
Table of Contents
