Dimplex Girona GFP050E Instruction Manual page 19

Accessing Runback Lock Mode
In order to enter the Runback Lock menu, Back, Menu
& Enter must be pressed simultaneously and held for
10 seconds. The user will then be prompted to enter the
runback lock PIN.
NOTE
The default password is 0000, the password
can be changed from within the runback lock
mode menu.
Enabling runback timer mode
From the main Runback lock menu select Runback, and then
Enable using Enter. Runback mode will be enabled, normal
functionality of the appliance will be disabled allowing only
the Runback mode functionality.
Disabling runback timer mode
From the main Runback lock menu select Runback and
Disable and confirm using Enter. Runback mode will be
disabled and full appliance functionality will be enabled.
Runback Mode Settings
Changing the Password
It is possible to set a user defined runback lock PIN code.
Once changed, the PIN code will be required to access the
runback timer mode menus.
To change the PIN code select "Change code" from the
main Runback lock menu. To complete the change, follow
the on-screen instructions, it will be necessary to input the
current PIN and then set the new PIN code.
12:00
Comfort Off
:
Runback lock
Enter code
0000
12:00
Comfort Off
Runback
Lock
Enter code
0000
Change code
Runback
Setback
Max Temp.
Runback
Enable
Disable
Setting
Runback lock
Changecode
Runback
Setback
Max Temp.
19