Table of Contents
Advertisement
Advance
The Advance function allows the heating profile of the heater to
be changed temporarily. When a timer has been selected, the
Advance function is used to begin the next Comfort On mode
early. If the heater is in Comfort Off mode and heat is required,
press the Advance button.
If the heater is in Comfort On and heat is not required, press the
Advance button and the heater will turn off until the beginning
of the next Comfort On period. If the heater is in Manual, Eco
Mode or Frost Protect and pressing the Advance button will
switch off the heater. The heater will remain off until the Advance
button is pressed again.
Boost
The Advance button is also used to enter the Boost mode which
provides temporary heating for one, two, three or four hours.
Press the Advance button twice to begin a one hour boost.
Continue pressing the Advance button to set longer boost period.
Options
The Options menu allows the settings to be modified to suit the
user's preferences. These are;
DST Rule - Select your daylight saving setting. The heater clock
will automatically adjust for daylight saving time. If no adjustment is
required then select none.
Auto Lock - Enable or disable the auto lock feature. This feature
locks the interface if left inactive for longer than one minute.
To unlock the appliance, press and hold Back and Enter for
two seconds.
Sound - Audio feedback can be enabled or disabled.
Service Info - Service information is displayed.
Temp Units - Choose whether your unit displays degrees centigrade
or Fahrenheit.
Comms - Choose to enable or disable Wireless Connectivity.
If additional RF Module is connected, user will have option to
enable or disable RF communications.
16
Advance
Home All Day
Comfort On
Boost 1hr
Comfort On
Options
DST Rule
Auto Lock
Sound
Service Info
Temp Units
Comms
Advertisement
Table of Contents
