Epson Stylus Color 660 Start Here Manual page 4

6. Place the ink cartridges in their holders with the blue
labels facing up and toward the back of the printer.
Then press down the clamps until they lock into place.
Keep ink cartridges out of the reach of children.
If ink gets on your hands, wash them thoroughly
with soap and water. If ink gets in your eyes, flush
them immediately with water.
7. Press the cleaning button to begin charging the ink
delivery system. Then close the printer cover.
Charging can take two to three minutes. The
flashes and the printer makes various sounds until it's
finished. Don't turn off the printer or interrupt the charging
process or you'll use more ink than necessary. Charging is
complete when the power light stops flashing and stays on.
Never turn off the printer when the
is flashing unless the printer hasn't moved or made
any noise for more than 5 minutes.
5 Load Paper
Load a stack of plain paper or special ink jet paper. A
sample pack of EPSON ink jet papers came with your
printer. Smaller size papers, such as 4 x 6-inch Photo
Paper, have specific loading instructions; see your Printer
Basics book for instructions.
1.
left edge guide
2.
power light
power light
Pull out the output tray extensions. Slide the left
edge guide so it's slightly wider than your paper.
Load your paper with the printable side up (on
special or ink jet paper, this side is coated or
whiter). Place it against the right edge guide, then
slide the left edge guide against the other side.
don't load paper
above this mark
right edge guide