Epson Stylus Color 660 Start Here Manual page 5

2
2
Install the Software
Install the Software
N
ow that you've set up your printer, you're ready to
install the software from the CD-ROM attached to the
front of this card. It includes printer software (also called
a printer driver), the electronic EPSON Stylus COLOR
660 Reference Guide, and bonus software applications.
You must install the printer driver for the printer to
work correctly.
Keep this card with you as you install your printer
software so you can refer to it when you need it.
1. Make sure your printer is connected to the
computer and that both are turned off.
2. Turn on your computer, and wait until you see the
icons on your Windows desktop.
3. Turn on your printer.
Important:
If you see a screen telling you that Windows has
detected your printer and to install a driver, always
select Cancel. You can't install your software that
way.
4. Insert your printer software CD-ROM in to your
computer's CD-ROM drive.
5. Double-click the
Windows desktop.
6. Double-click the
My Computer folder.
7. Then double-click the
installer. (Don't select any other icon in the folder.)
8. You see the License Agreement window. Read the
agreement and click
icon on your
My Computer
CD-ROM drive icon in the
icon to start the
EPSON
.
Agree
9. You see the Main Menu. Click the
button. Follow the on-screen instructions.
Driver
The printer driver and utility files are installed.
10. When you see the screen below, click
restart your computer. Be sure to leave your
CD-ROM in the drive.
After your computer has restarted, you'll see
the EPSON software installer Main Menu again
(if necessary, close any open windows covering the
Main Menu).
If you don't see the Main Menu, double-click
My Computer, double-click your CD-ROM drive
icon, then double-click the EPSON icon.
Install Printer
. Then
OK