Epson Stylus Color 660 Start Here Manual page 11

Epson stylus color 660: quick start
Hide thumbs Also See for Stylus Color 660:
Table of Contents

Advertisement

6. Place the ink cartridges in their holders with the blue labels facing up and toward
the back of the printer. Then press down the clamps until they lock into place.
7. Press the X cleaning button to begin charging the ink delivery system. Then close
the printer cover.
Charging can take two to three minutes. The Ppower light flashes and the printer
makes various sounds until it's finished. Don't turn off the printer or interrupt
the charging process or you'll use more ink than necessary. Charging is complete
when the Ppower light stops flashing and stays on.
4
Keep ink cartridges out of the reach of children.
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets in your eyes, flush them immediately
with water.
Never turn off the printer when the
unless the printer hasn't moved or made any noise for more
than 5 minutes.
P
power light is flashing

Advertisement

Table of Contents
loading

This manual is also suitable for:

C200001 - stylus color 660 inkjet printer

Table of Contents