The margins are incorrect
Possible cause
Margins are set incorrectly
in your software
application.
Paper settings in the printer
software are incorrect for
your paper size.
The image is inverted as if viewed in a mirror
Possible cause
You used a Flip Horizontal
option in your application
software or the printer
software.
The printer prints blank pages
Possible cause
Your printer is not the
Windows default printer.
Your printer is not selected
in the Macintosh Chooser.
Paper settings in the printer
software are incorrect for
your paper size.
The print head nozzles are
clogged.
Solution
Check your software documentation for instructions on selecting
the correct margins for your paper size.
Make sure the margins are within the printable area of the page.
See the Appendix for more information.
Select the correct paper settings for your paper size. See
Chapter 1 for more information.
Solution
Turn off the Flip Horizontal or mirror setting in your application
software or the printer software. See Chapter 2 for information.
Solution
Select your printer as the default Windows printer. See your
Windows documentation or online help for instructions.
Open the Chooser and select your printer. See the Setup Guide for
instructions.
Select the correct paper settings for your paper size. See
Chapter 1 for more information.
Clean the print heads following the instructions in Chapter 5.
6-15
Troubleshooting