Epson Stylus Color 600 User Manual page 88

Troubleshooting
After you install your printing software, you see the Windows 95 New Hardware
Found window
Possible cause
An operating system error
has occurred.
You see a spooling error message (Windows)
Possible cause
Spooling error messages or
very slow printing may be
caused by temporary files.
Your hard drive is too full.
Your computer doesn't
have enough memory for
the file you're printing.
In Windows 95, the Status Monitor box does not appear with the Despooler
Possible cause
The Windows Print
Manager is interfering with
the Status Monitor.
You see a memory error message (Macintosh)
Possible cause
You may need to increase
the memory allocation for
your application, EPSON
Monitor2, or both.
Solution
Click Do not install a driver, and then click OK.
Solution
Change the Spool Manager default directory, following the
instructions in Chapter 4.
Delete unnecessary files to make room on the drive.
Try one of the following:
Reduce the resolution of your image.
Select fewer colors or a lower resolution for your monitor.
Add more memory to your computer.
Solution
Make sure Use Print Manager for this port is not checked in the
Spool Manager Queue setup. Then check your bidirectional spool
settings. See Chapter 4 for instructions.
Solution
Choose Get Info from the File menu when your application is
active and increase the memory requirements. See Chapter 4 for
more information. Or turn off background printing (you won't be
able to use Monitor2).
6-10