Epson Stylus Color 600 User Manual page 89

A portion of your image doesn't print (Macintosh)
Possible cause
Your system doesn't have
enough available memory.
You may need to increase
the memory allocation for
your application, EPSON
Monitor2, or both.
Printing is too slow
Possible cause
Your printer software
options are set incorrectly.
Your system doesn't have
enough resources.
You're using background
printing on a Macintosh.
Your port settings are
incorrect in Windows 95.
Your printer switches to the modem port or won't confirm on the printer port
(Macintosh)
Possible cause
Your system has extension
conflicts.
You're using an AppleTalk
cable.
Solution
Close any other applications you are running or turn off
background printing.
Choose Get Info from the File menu when your application is
active and increase the memory requirements. See Chapter 4 for
more information. Or turn off background printing (you won't be
able to use Monitor2).
Solution
For faster printing, try the following:
Set Print Quality to Economy.
Turn MicroWeave off.
Turn High Speed on.
Choose Black ink.
Choose No Halftoning.
See Chapters 1 and 2 for more information.
Clear space on your hard disk drive or run a defragmentation
utility.
Don't run too many applications at the same time.
Turn off virtual memory.
Increase your system's memory (RAM).
Choose Get Info from the File menu when your application is
active and increase the memory requirements. See Chapter 4 for
more information. Or turn off background printing (you won't be
able to use Monitor2).
Change your default spool directory and disable port settings as
described in Chapter 4.
Solution
®
Make sure AppleTalk
disable the AppleShare, FileShare, and PrinterShare extensions.
Set your printer and any unused printers to the printer port. Then
restart your system.
Make sure you're using a standard Apple System Peripheral-8
cable.
6-11
is inactive. In the Extensions Manager,
Troubleshooting