Install The Ink Cartridges - Epson Stylus Color 600Q Quick Setup Manual

Caution:
You must completely
remove the yellow
portion of the tape seal
from the top of the
cartridge or you will
permanently damage it.
Don't remove the tape
seal from the bottom
or ink will leak.
Warning:
If ink gets on your
hands, wash them
thoroughly with soap
and water. If ink gets in
your eyes, flush them
immediately with water.

Install the Ink Cartridges

1. Lower the output tray and raise the printer cover.
2. Press the
light flashes, the
cartridge holders move to the installation position.
3. Pull up the ink cartridge clamps.
4. Open the ink cartridge packages. Remove the disposable
yellow portion of the tape seal on top. Don't remove the white
portion.
black ink
cartridge
power button to turn on the printer. The
and ink out lights come on, and the ink
4
power
color ink
cartridge