Epson Stylus Color 600Q Quick Setup Manual page 3

Caution:
Do not plug the printer
into an outlet
controlled by a wall
switch or timer, or on
the same circuit as a
large appliance. This
may disrupt the power,
which can erase
memory and damage
the power supply.
Plug In the Printer
1. First make sure the power is off. Check the
button; it's off when its surface is raised above the printer
surface.
2. Plug the power cord into a properly grounded outlet. To
protect the printer from power surges you may want to use
a surge protector.
power
3
power