How To Use The Hair Dryer - Panasonic nanoe EH‑NA55 Operating Instructions Manual

How to use the hair dryer

1
1
Before using the hair dryer, check the voltage
rating and shape of the household outlet. Then
set the dual voltage switch in accordance with
the voltage of your region.
• Use a key head, etc. to turn the dual voltage switch until
it locks into place.
2
2
Confirm that the power switch is at position
"0". Then plug into a household outlet and turn
on the power switch.
3
3
Select the intensity of the airflow with the
power switch, and then dry your hair.
4
4
Set the power switch to position "0", and then
remove the plug from the household outlet.
10
►Notes
• Keep a distance of over 3 cm
between the air outlet and your hair.
• Keep the appliance at least 10 cm
away from your hair so that hair will
not be sucked into the air inlet.
• Be careful not to bump the air inlet
such as on the corner of a desk.
• Drops of water may blow out of the nanoe™ outlet during
use, but this is not a malfunction.
• A humming noise may come out of the nanoe™ outlet, but
this is the sound of nanoe™ being discharged and is not a
malfunction.
• You may notice a characteristic odor when using this hair
dryer. This is not harmful to the human body.
• The effects of nanoe™ might not be felt by the following
people. People with crimpy hair, strong curly hair, very
smooth hair, short hair, or who have had a hair straightening
perm in the last three or four months.
3 cm
10 cm