Advertisement
Step 39:
Attach (1) Rail Board (C07) to the Tower Legs using (3) Nuts (A1) and (3) Bolts (A1).
Ensure the edges of the Rail board are ush with the edges of the Tower Legs.
Step 40:
Attach (1) Wall Rail Board (C09) to the Tower Legs (L02-1) and (L05) using (2) Screws
(B1). Ensure that the Wall Rail Board is aligned with the top edge of the Rail Board (C13).
32
Step 25:
Insert (2) Nuts (A-2) into (1) Tower Leg (C01) as shown. Orient the Tower Leg as shown
with the (2) large predrilled holes facing up.
Step 26:
Insert (1) Nut (A-2) into each Tower Leg (C02). Lay out the Tower Legs as shown.
Ensure the previously installed Nuts on the Tower Legs face the correct direction.
180°
25
Advertisement
