modway EEI-3416 Quick Start Manual page 2

EEI-3416 CHAIR
STEP 1:
1. Please put Chair Body (1) upside down on a carpeted or padded surface.
2. Attach Chair Base (2) to Chair Body (1) by using 4 pieces of Bolts (A), 4 pieces of Spring Washers (B)
and 4 pieces of Flat Washers (C). Tighten Bolts (A) by using Allen Wrench M6 (D) as shown in Figure 1.
3. Use Allen Wrench M8 (E) to tighten bolt (pre-assembled) in the middle of the Chair Base (2) as shown
in Figure 2.
STEP 2:
1. Carefully turn over the Chair.
2. Put Seat Cushion (3) into the Chair Body (1) as shown.
Customer Service 908-368-1025︱www.modway.com
Assembly is complete. Your Chair is ready to enjoy now!
Attention:
Please adjust chair level
by adjustable pin.
Page 2 of 2