Step 5: Securing Left Frame; Step 6: Positioning Right Frame - modway EEI–2934 Quick Start Manual

EEI–2934
THREE SEATER
STEP 5:
Insert 2 pieces of Bolt (A) into the pre-drilled holes on Chair Back (1) through the top pre-drilled holes on Left
Frame (3).
Insert 2 piece of Bolt (A) into the pre-drilled holes on Chair Seat (2) through the top pre-drilled holes on Left
Frame (3).
Use Allen Wrench (B) to tighten Bolts (A) clockwise until secure.
A
B
Hardware & Tool required
STEP 6:
Insert the tenon on Chair Back (1) and Chair Seat (2) into the rabbet on Middle Seater as shown.
Insert Batyline fabric (7) on wooden bar. Carefully position Right Frame (4) to the assembled Chair Back (1) and
Chair Seat (2) as shown.
Insert the tenon on Chair Back (1) and Chair Seat (2) into the rabbet on Right Frame (4).
Customer Service 908-368-1025 www.modwayfurniture.com
A
A
A
A
A
B
A
A
1
2
Ax6 Bx1
7
Page 4 of 5