modway EEI-2252 Quick Start Manual

Bench

EEI-2252

BENCH

Thank you for purchasing the MODWAY BENCH！

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2.Owing to the size and weight of the bench, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approx assembly time: 30 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that has been provided.

6.Please keep all fitting out of reach of children.

Bench Top

Customer Service 908-368-1025︱www.modwayfurniture.com

Bolt M6x20mm

Bolt M6x25mm

Allen Wrench M4

Leg

Page 1 of 2

Table of Contents

Need help?

Do you have a question about the EEI-2252 and is the answer not in the manual?

Page 1 EEI-2252 BENCH Thank you for purchasing the MODWAY BENCH！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.Owing to the size and weight of the bench, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI-2252 BENCH STEP 1: Please put the Bench Top (1) upside down on a carpeted or padded area. Remove the plastic covers which pre-install in the end of the Bench Top (1) by using Allen Wrench (C). Insert 1 piece of Leg (2) into Bench Top (1) as shown.

Eei-2252-slv-gry