Pacific Hoists U-MEGA Series Operations Manual & Parts List page 10

(Illust. 2)
Firm and steady button operation is required. Never push the button switch intermittently.
Always avoid excessive inching operation.
Always make sure the hoist motor completely stops before reversing.
Always leave the push button switch cable and bottom hook vertically static after completion of
operation, never leave them at any position which may cause swing or slip.
Do not use the hoist chain as a welding electrode.
Never stand under a raised load (Illust. 5)
Slings must be applied to load evenly and centrally to ensure correct balance. Never lift any
object which is insecure or out of balance.
Never use hoist to end or side pull a load. (Illust. 3)
Never wrap around and hook back the load chain as a sling to lift a load. (Illust. 4)
(Illust. 3) (Illust. 4)
9