Table of Contents
Advertisement
EEI-2268
COFFEE TABLE
STEP 1:
Remove the plastic covers which pre-install in the end of the Table Top (1) by using Allen Wrench (C).
Please put 1 piece of Leg (2) and Table Top (1) upside down on a carpeted or padded area as shown.
Insert Table Top (1) into the Leg (2) as shown.
Insert 2 pieces of Bolts (B) from the pre-drilled holes on the bottom of the Table Top (1) into each side on the bottom of Leg (2).
Insert 2 pieces of Bolts (A) from the pre-drilled holes on the side rail of the Table Top (1) into each end of Leg (2) as shown.
Do not fully tighten Bolts (A&B) at this step.
Repeat the same steps for the remaining 1 piece of Leg (2).
After checking the leveling for all connections, please use Allen Wrench (C) to tighten all Bolts (A&B) clockwise until secure.
STEP 2:
Carefully position the table to your desired location.
Customer Service 609-256-9000︱www.modway.com
Assembly is completed. The table is ready to enjoy now!
Page 2 of 2
Advertisement
Table of Contents
Need help?
Do you have a question about the EEI-2268 and is the answer not in the manual?
Questions and answers