Miele EVS 7010 Operating And Installation Instructions page 52

Installation
Installing and connecting the drawer
 Check that the air filter is fitted and
the safety screws have been removed
from the back of the drawer (see
"Installation – Building in").
 Connect the mains cable to the
drawer.
 Slide the closed drawer into the
housing unit. When doing so make
sure that the mains connection cable
does not get trapped or damaged.
 Align the drawer at right angles.
 Open the drawer and secure it to the
right and left-hand side walls of the
housing unit with the 2 wood screws
supplied (3.5 x 25 mm).
 Remove the foam adhesive label from
the glass lid.
 Remove the 4 foam adhesive labels
from the back of the front panel on
the right and left-hand sides.
 Connect the drawer to the mains.
52
When the drawer is first connected, or
after an interruption to the mains, all of
the sensor controls and indicators in
the display will light up for approx.
10 seconds for testing (initialisation).
As soon as they go out, the drawer is
ready for use.
 When installing the combination
appliance, protect the top edge of the
front panel from abrasive marks.
 Install the combination appliance in
accordance with the operating and
installation instructions supplied with
it.