Miele EVS 7010 Operating And Installation Instructions page 39

Issue
The vacuuming process
is cancelled after
5 seconds. An acoustic
tone sounds and the
 symbol lights up red.
Abrasion marks on the
top edge of the front
panel.
Cause and remedy
The glass lid is not sitting evenly. There is an object,
e.g. the edge of a bag, or some soiling on the surface
of the chamber seal.
 Remove the obstruction and/or the soiling.
 Close the glass lid and press it down lightly for
approx. 5 seconds.
The chamber seal is not fitted correctly.
 Press the chamber seal in all the way round to
make sure it is fitted evenly.
The chamber seal is damaged, e.g. cracks can be
seen.
 Call your Miele dealer to replace it.
Installing or removing an appliance above the drawer
has caused abrasion marks.
 Carefully remove the abrasion marks by rubbing
the top edge with the abrasive side of a standard
scouring pad.
Problem solving guide
39