Installation; Safety Instructions For Installation - Miele EVS 7010 Operating And Installation Instructions

Installation

Safety instructions for installation


Risk of damage from incorrect installation.
Incorrect installation can cause damage to the drawer and/or the combination
appliance.
The appliance must only be installed by a qualified person.

Before connecting the drawer to the mains supply, ensure that the
connection data on the data plate (voltage and frequency) match the
mains electricity supply.
This data must correspond in order to avoid the risk of damage to
the drawer. Consult a qualified electrician if in any doubt.

The socket and on-off switch should be easily accessible after the
drawer has been installed.

The drawer may only be built in in combination with those
appliances quoted by Miele as being suitable. Miele cannot
guarantee trouble-free operation if the appliance is operated in
combination with appliances other than those quoted by Miele as
being suitable.

The base on which the drawer and the combination appliance are
fitted must be fixed in place and must support the weight of both
appliances.

When building in the combination appliance, it is essential to
follow the instructions given in the operating and installation
instructions supplied with the combination appliance.

The drawer must be installed in such a way that
- you can see into the vacuum chamber. This helps to avoid
scalding and burns from touching the hot sealing bar or weld
seam.
- there is enough space for the drawer to be pulled out fully and for
opening the glass lid.
42