Step 1: Assembly Of Chair Body; Step 2: Attaching Seat Cushion; Assembly Completion - modway EEI-2130 Quick Start Manual

EEI-2130/EEI-2031 CHAIR/SOFA
STEP 1:
Please put the Chair Body (2) upside down on a carpeted or padded area by two adults to make the corners
fully visible. Open the Zipper on the bottom of Chair Body (2) as shown, take out the packages of 4 pieces Leg (3),
then close the Zipper on the bottom of Chair Body (2) .
Attach 1 piece of Leg (3) into the bottom of Chair Body (2) by using 2 pieces of Bolts (A) with 2 pieces
of Flat Washer (B) through the holes as shown. Use Allen Wrench (C) to tighten the Bolts (A) clockwise until secure.
Repeat the same steps for the other 3 pieces of Leg (3).
Legs inside
x 4PCS
STEP 2:
Carefully turn over the Chair Body (2), tear off the Protect film attached onto the Velcro at first. Then place the
Seat Cushion (1) to the assembled Chair Body (2) as shown. Attach them by using Velcro.
Assembly is complete.The Chair is ready to enjoy now!
Customer Service 908-368-1025 I www.modwayfurniture.com Page 2 of 2