EVGA Z690 CLASSIFIED User Manual page 71

EVGA Z690 CLASSIFIED (121-AL-E698)
10. The controller defaults the capacity to the maximum available space for the
RAID. Leaving the capacity at default is recommended because reducing the
size is not beneficial, except in limited cases.
11. To complete the setup process, please select "Create Volume" at the bottom of
the page. Depending on the array type, drive type, and volume this can take a
few seconds to a few minutes.
12. Once the array is completed you will see this text, or something similar based
on the array type and drives used. At this point, the array is ready to use.
- 71 -