Mitsubishi Electric PAR-CT01MAU-SB Instruction Book page 11

①
Preset temperature or room
temperature
Preset temperature or room temperature
appears here. (See the Installation Manual.)
②
Setting item and setting
contents
The setting items "Preset temperature"
↔ "Operation mode" ↔ "Fan speed"
↔ "Vane" ↔ "Ventilation" ↔ "Louver," and
their setting contents appear here.
"Centrally controlled" appears for a certain
period of time when a centrally-controlled
item is operated.
③
Clock
Current time appears here.
(See the Installation Manual.)
④
Appears when the On/Off timer (Page
31) or Auto-off timer (Page 34)
function is enabled.
appears when the timer is disabled by
the centralized control system.
⑤
Appears when the Weekly timer is enabled.
⑥
Appears while the units are operated in the
energy-save mode. (Will not appear on
some models of indoor units)
⑦
Appears while the outdoor units are
operated in the silent mode.
⑧
Appears when the ON/OFF operation is
centrally controlled.
Page 17
Page 31, 34
Page 36
Page 50
Page 39
⑨
Appears when the operation mode is
centrally controlled.
⑩
Appears when the preset temperature is
centrally controlled.
⑪
Appears when the filter reset function is
centrally controlled.
⑫
Appears when the buttons are locked.
⑬
Appears when the preset temperature
range is restricted.
⑭
Appears when the built-in thermistor on the
remote controller is activated to monitor
the room temperature.
appears when the thermistor on the
indoor unit is activated to monitor the room
temperature.
⑮
Appears when an energy-saving operation
is performed using a "3D i-See sensor"
function.
⑯
Indicates when filter needs maintenance.
⑰
Appears when the HOLD function is
enabled.
⑱
Preliminary error display
An error code appears during the
preliminary error.
Page 45
Page 42
Page 77
11