Technical Data - DeWalt XR DCD703 Original Instructions Manual

EnGLIsH
DRILL/DRIVER
DCD703
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No‑load speed
1st gear
2nd gear
Max. Torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack or heads)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a =
h,D
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
26
WALT one of the
e
EC‑Declaration of Conformity
Machinery Directive
DCD703
V 12
DC
1
Sub-Compact Drill/Driver
Li‑Ion
DCD703
W 250
D
e
Technical Data are in compliance with:
min‑1 0–425
2006/42/EC, EN62841‑1:2015, EN62841‑2‑1:2018+A11:2019.
min‑1 0–1500
These products also comply with Directive 2014/30/EU and
Nm 57.5/25.5
2011/65/EU. For more information, please contact D
mm 10
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
mm 20
file and makes this declaration on behalf of D
mm
10
mm
‑
kg 0.73
Markus Rompel
Vice President of Engineering, PTE‑Europe
D
dB(A) 72
e
65510, Idstein, Germany
dB(A) 83
10.06.2021
dB(A) 5
m/s 2 2.5
m/s 2 1.5
m/s 2 < 2.6
m/s 2 1.5
Sub-Compact Drill/Driver
DCD703
D
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841‑1:2015, EN62841‑2‑
1:2018+A11:2019
These products conform to the following UK Regulations
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
WALT declares that these products described under
WALT, Richard‑Klinger‑Straße 11,
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
WALT declares that these products described under
WALT at
e
WALT.
e