Table of Contents
Advertisement
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD777, DCD778
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. Torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-1:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound
level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Screwdriving
Vibration emission value a
=
h
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
WALT one of the
e
DCD777
V
18
DC
2
Li-Ion
min
-1
0–500
min
-1
0–1750
–
min
-1
min
-1
–
Nm
65/26
mm
1.5–13
mm
30
mm
13
mm
–
kg
1.15
dB(A)
73
dB(A)
84
dB(A)
3
=
m/s
2
4.3
m/s
2
1.5
m/s
<2.5
2
m/s
1.5
2
=
m/s
–
2
m/s
–
2
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
DCD778
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
18
2
EC-Declaration of Conformity
Li-Ion
Machinery Directive
0–500
0–1750
0–8500
Cordless Compact Drill/Driver
DCD777
0–29750
65/26
Cordless Compact Drill/Driver/Impact Drill
1.5–13
DCD778
D
WALT declares that these products described under Technical
e
30
Data are in compliance with:
13
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-1:2018+A11:2019.
13
These products also comply with Directive 2014/30/EU and
1.2
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
87
98
3
Markus Rompel
Vice President of Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
e
4.3
65510, Idstein, Germany
1.5
10.09.2021
<2.5
1.5
18.3
1.5
English
WALT at
e
WALT.
e
3
Advertisement
Table of Contents
