Epson Stylus 1520 Quick Setup Manual page 3

2. Press the two notches at the back of the output tray onto the metal posts on the printer.
Post
3. Flip down the legs on the underside of the output tray so it sits up on the paper support.
3
Plug the Printer In and Turn It On
1. First make sure the power is off. Check
the P button; it's off when its
Operate
surface is even with the button guards on
each side.
2. Plug the power cord into a properly
grounded outlet. To protect the printer
from power surges, you may want to use a
surge protector.
Caution:
Do not plug the printer into an outlet controlled by a wall switch or timer, or
on the same circuit as a large appliance. This may disrupt the power, which
can erase the printer's memory and damage the power supply.
3. Press the P
Operate
The and
Operate
installation position. The
Leg
button to turn on the printer.
lights come on and the ink cartridge holders move to the
Ink Out
light begins flashing.
Pause
Post
3
Quick Setup
Leg