Changing The Batteries - Vicks VNT200 Product Description

How to view temperatures in memory
Viewing Previous Temperatures
Press the "MEMO" button to view previous memories. The
previous temperatures will be displayed on the LCD screen. The
most recent temperature will be the last taken.
To clear the memory of previous temperatures, press and hold
the "MEMO" button for 4 seconds.
How to turn off sound
Press the MODE button to turn sound on and off. Display will show
the speaker icon and the word ON when sound is on. Display will
not show the speaker icon and the word OFF when sound is off.

Changing the batteries

The No Touch thermometer comes with 2 AAA batteries.
Replace with 2 new AAA batteries when the flashing battery symbol appears on
the LCD screen. To change the batteries, slide open the battery cover and remove
batteries. Replace the batteries being sure to align properly as indicated inside the
battery compartment. Remove the battery from the product if it is not required for
extended periods of time in order to avoid damage to the thermometer resulting
from a leaking battery.
Only discard empty batteries. To protect the environment, dispose of empty
batteries at your retail store or at appropriate collection sites according to
national or local regulations.
6
Error messages
Error Situation
Message
Individual being
measured is above
temperature range
of device, above
43 °C.
Individual being
measured is below
temperature range
of device, below
34 °C .
Blank display
Thermometer does
not have power.
Solution
Make sure there are no
obstacles in front of forehead
being measured and ensure
you are 1-5 centimeters
from the forehead being
measured. In addition, make
sure the device is in the room
for 30 minutes before taking
a measurement. Lastly, wait
1 minute for every
2 measurements taken.
Make sure there are no
obstacles in front of forehead
being measured and ensure
you are 1-5 centimeters
from the forehead being
measured. In addition, make
sure the device is in the
room for
30 minutes before taking a
measurement. Lastly, wait
1 minute for every
2 measurements taken.
Please check if the batteries
have been loaded correctly.
Also check polarity (+) and
(-) of batteries.
Check to see if batteries
are dead and need to be
replaced. Contact Consumer
Relations if thermometer still
does not function.
7