Vicks SpeedRead ComfortFlex V-911F-EE, V-965F-EE - Digital Thermometers Manual

Table of Contents

Contents

1 OVERVIEW
2 TEMPERATURE READINGS
3 BEFORE USE
4 OPERATING YOUR VICKS DIGITAL THERMOMETER
5 CLEANING INSTRUCTIONS
6 SPECIFICATION
7 CHANGING THE BATTERIES
8 IMPORTANT SAFETY INFORMATION
9 PRECAUTIONS
10 Documents / Resources
- 10.1 Download manual

OVERVIEW

Before first use, remove label from the display.

Overview

Hypoallergenic Gold Probe Tip
Flexible Probe (only on model V-965F-EE)
On/Off Button
Large Display with Fever InSight™ backlight
Battery Compartment (on back side)

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Please read these instructions carefully to ensure accurate temperature measurements and safe operation. When used properly, this high quality product will give you years of accurate, dependable service.

TEMPERATURE READINGS

Temperature readings vary from person to person. Although there is no one "normal" temperature reading, a temperature, taken orally, ranging between 36.1°C and 37.7°C is considered normal. A rectal temperature is generally 0.5°C higher and an underarm (axillary) temperature will be 0.5°C lower. The best method to determine your own normal temperature is to use the thermometer when you are feeling well. Record your reading twice a day (early morning and late afternoon). Take the average of the two temperatures. This is considered your normal body temperature. Any variation from it may indicate some sort of illness and you should consult your physician. Clean the probe before using, please refer to cleaning instructions on how to clean.

BEFORE USE

Your Vicks Digital Thermometer is a 3-in-1 thermometer for oral, rectal, or underarm use. Whichever method is used, it is recommended that for 15 minutes prior to use, you avoid eating or drinking, exercising, taking showers or baths or smoking.

OPERATING YOUR VICKS DIGITAL THERMOMETER

TURNING THE THERMOMETER ON
1. Turn thermometer on by pressing the On/Off button (Fig. 1).
2. A beep signal will sound and the display will flash Red/Yellow/Green for 1 second.
3. Wait for the thermometer to get ready
  - The display will show a test value (Fig. 2).
  - The display will show last measurement for 2 seconds (Fig. 3).
  - After about 5 seconds, the display will show it's ready (Fig. 4).
SELECTING WHERE TO TAKE THE TEMPERATURE
1. Oral Use
  - It is important to place the tip of the thermometer well under the tongue to get a good, accurate reading. (Fig. 5) Place sensor tip in areas marked with "". Keep mouth closed and sit still to help ensure an accurate measurement.
  - When the peak temperature is reached (usually within 19 seconds), 5 beep signals will sound and the " °C" sign will stop flashing. The temperature measurement is now ready to read and will not change when the thermometer is removed.
  - Wash the thermometer as recommended
2. Under-the-arm (Axillary) Use
  This method can be used for babies and young children.
  - Wipe the underarm with a towel.
  - Place the probe tip under the arm so the tip is touching the skin and position the arm next to the body (Fig. 6). With a young child, it is sometimes helpful to hug the child to keep their arm next to their body. This ensures that the room air does not affect the reading.
  - When the peak temperature is reached (usually within 22 seconds), 5 beep signals will sound and the " °C" sign will stop flashing. The temperature measurement is now ready to read and will not change when the thermometer is removed.
    NOTE: This method produces a temperature reading 0.5°C lower than if the temperature were taken orally.
  - Wash the thermometer as recommended.
3. Rectal Use
  Commonly used for babies, young children, or when it is difficult to take an oral or underarm temperature.
  - Lay the patient on his/her side. For a baby, the proper position is to lay on its stomach with legs hanging down, either across your knees or at the edge of a bed or changing table. This positions the infant's rectum for safe and easy insertion of the thermometer.
  - Gently insert the tip of the thermometer NO MORE THAN 1cm into the rectum. If you detect resistance, stop. Hold the thermometer in place during measurement.
  - When the peak temperature is reached (usually within 13 seconds), 5 beep signals will sound and the " °C" sign will stop flashing. The temperature measurement is now ready to read and will not change when the thermometer is removed.
    NOTE: This method produces a temperature reading 0.5° higher than if the temperature were taken orally.
  - Wash the thermometer as recommended.
READING THE MEASUREMENT: FEVER INSIGHT FEATURE
Reading time:
- Results will vary by individual and method used. 8 seconds refers to the shortest reading time achieved in clinical studies. Average reading times in clinicals: 13.0 seconds rectal, 19.0 seconds oral and 22.0 seconds underarm.
- The Vicks SpeedRead™ and ComfortFlex™ thermometers come with the patented " Fever InSight" feature which offers a color indicator with the temperature reading. This feature will help you explain to your child the meaning of temperature. It also helps by distracting your child from possible fear associated with temperature taking, especially with young children.
- For readings between 36.1-37.1°C, the screen will display green as the backlight color indicating the temperature is within the " normal" range.
- For readings between 37.2-38.2°C, the screen will display yellow as the backlight color indicating a slight elevation in temperature.
- For readings 38.3°C and above, the screen will display red as the backlight color indicating possible fever. The Fever InSight feature continues for about 7 seconds.
TURNING THE THERMOMETER OFF
Turn the thermometer off by pressing the On/Off button. If you forget to turn it off, the thermometer will automatically turn off after approximately 1 1/2 minutes.

CLEANING INSTRUCTIONS

Clean the thermometer by washing the probe tip and lower stem with soap and warm water and disinfect the tip and lower stem in rubbing alcohol (70% isopropyl alcohol).
Wipe dry with soft cloth.
DO NOT BOIL OR WASH IN DISHWASHER. This will cause the thermometer to no longer function and will void the warranty.
Do not wash with any thinner or chemical solvent.

SPECIFICATION

Type:	Digital Thermometer (Predictive)
Battery Life:	more than 300 measurements or approximately 2 years if used every other day.
Accuracy in water bath:	+/-0.1° between 35.5-41.6°C at room temperature of 21.6°C.
Temperature Range:	32.0-42.8°C. If less than 32.0°C " Lo" is displayed. If more than 42.8°C " Hi" is displayed.
Operating temperature:	+10°C to +40°C, 10% to 80% RH
Storage temperature:	–10°C to +60°C, 10% to 80% RH If the device is not used within specified temperature and humidity ranges the technical accuracy of the measurement cannot be guaranteed.
Beeper:	The thermometer will beep for approximately 8 seconds when peak temperature is reached. For temperatures over 38.3°C, the audible Fever Alert will sound 5 times.
Error Messages:	The display will read "Err" when a malfunction occurs and the thermometer will power off after 1 minute.

This product conforms to the provisions of the EC directive 93/42/EEC (Medical Device Directive). This device conforms to the following Standards:

EN 60601-1 Medical electrical equipment - Part 1: General requirements for safety
EN 60601-1-2 Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
EN 12470-3 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device.

CHANGING THE BATTERIES

Your Vicks Digital Thermometer features a long life battery. When the appears and flashes in the center top of the display, the battery is exhausted and needs replacing.

IMPORTANT SAFETY INFORMATION

Clean the thermometer probe before using.
Do not drop the thermometer or expose it to heavy shock. The unit is not shock- proof.
Do not bend or bite the probe.
Do not store the unit under direct sunlight, at a high temperature, or in high humidity or dust. Performance may be degraded.
Stop using the thermometer if it operates erratically or if the display malfunctions.
Keep out of the reach of unsupervised children.
Clean the thermometer probe before storing.
Do not attempt to disassemble the unit except to replace the battery.
If the thermometer has been stored at below-freezing temperatures, allow it to warm naturally to room temperature before using.

PRECAUTIONS

Clean the thermometer probe before using.
Do not drop the thermometer or expose it to heavy shock. The unit is not shock- proof.
Do not bend or bite the probe.
Do not store the unit under direct sunlight, at a high temperature, or in high humidity or dust. Performance may be degraded.
Stop using the thermometer if it operates erratically or if the display malfunctions.
Keep out of the reach of unsupervised children.
Clean the thermometer probe before storing.
Do not attempt to disassemble the unit except to replace the battery.
If the thermometer has been stored at below-freezing temperatures, allow it to warm naturally to room temperature before using.