Huawei eLTE2.2 eA660 Series User Manual page 51

eLTE2.2 eA660 Series CPE
User Guide
Procedure
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
----End
Issue 01 (2013-10-30)
When the CPE fails to access the Internet, run the Ping functions to quickly check the
network connection status.
Start the IE browser, enter http://192.168.1.1 in the address bar, and press Enter. Log in
to the Web management page, and enter User name and Password.
Use Internet Explorer 7 (IE7) or later versions.
Choose System > Diagnosisto display the Diagnosis page.
Set Method to Ping.
Enter the domain name in the Destination IP address or domain box.
Set Packet size and Timeout and select the Enable check box behind Do not
Fragment.
Click Ping.
Wait until the operation is performed. The command output is displayed in the Result
box.
Packet Length indicates the bytes of a sent packet, and ranges from 1 to 9,000 bytes.
Timeout indicates the timeout period of each reply, and ranges from 1 to 10 seconds.
When the CPE does not run properly, the System Check can be used to preliminarily
identify the problem.
Start the IE browser, enter http://192.168.1.1 in the address bar, and press Enter. Then
enter the correct password and click Log In.
Use Internet Explorer 7 (IE7) or later versions.
Click System > Diagnosis to display the Diagnose page.
Set Method to System Check.
Click Check.
Wait until the system check is performed. The possible causes will be displayed on the
page.
Click Export to export the detailed information to the computer. If necessary, send the
detailed information to maintenance personnel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Maintenance
47